1.Application Materials:
د فایبر لیزر پرې کولو تجهیزات is suitable for metal cutting with Stainless Steel Sheet, Mild Steel Plate, Carbon Steel Sheet, Alloy Steel Plate, Spring Steel Sheet, Iron Plate, Galvanized Iron, Galvanized Sheet, Aluminum Plate, Copper Sheet, Brass Sheet, Bronze Plate, Gold Plate, Silver Plate, Titanium Plate, Metal Sheet, Metal Plate, Tubes and Pipes, etc
Machine parameters for laser generator:
توکی | پیرامیټرې |
د لیزر ډول | فایبر لیزر |
ځواک | 500W/1000W/1500W/2000W/3000W/4000W/6000W/8000W/12000W |
Wave length | 1070-1080nm |
Electro-optical conversion efficiency | 25-30% |
XYZ Route | 3025mm/1525mm/100mm |
Material Cutting thickness | 0.2-8 ملي میتر |
Cutting seam width | 0.1-0.2mm |
د موقعیت درستیت تکرار کړئ | ±0.05mm/500mm |
د موقعیت درستیت | ±0.05mm/500mm |
Max.Moving Speed | 60000mm/min |
Max.Accerlation speed | 25m / دقیقې |
Max.loading weight | 500kg |
د ماشین وزن | 2300kg |
Required Power | 220V 50Hz/60Hz |
Machine size(L*W*H) | 4500mm*2450mm*1700mm |
Configuration of fiber laser cutter:
توضيح | Qty | Original | Brand | |
1 | Fiber laser source (500W/800W) | 1SET | China | MAX |
2 | د لیزر د پرې کولو سر | 1PC | Switzerland | RAYTOOLS |
3 | Machine bed and accessories | 1SET | China | |
4 | Electric control | 1SET | OMRON,Schneider | |
5 | Gas circuit control | 1SET | Japan | SMC |
6 | Precise Rack | Each 3SETS | China | |
7 | Precise linear guide rail | Each 3SETS | Taiwan | PMI |
8 | Planetary Gear | 3SET | China | |
9 | Machine bed accessories | 1SET | China | |
10 | Digital cutting system | 1SET | USA | AHEADCUT |
11 | Industrial control computer | 1SET | China | AHEADCUT |
12 | Communication servo and driver | 4SETS | China | |
13 | Cooling Unit | 1SET | China | |
14 | Waste recycling equipment | 1SET | China |
Equipment work and environmental requirements
Requirement | |
1 | Power supply: regulated stable power supply: (recommended) (1)rated output voltage: 220 v (2) voltage frequency: 50 hz (3) the stability of the two phase voltage + 5% (4) the output voltage adjustment rate: < 2% |
2 | Cutting with auxiliary gas: Clean, dry compressed air and high purity oxygen (O2) and nitrogen (N2) ,purity no less than 99.9% purity |
3 | Cutting material Sheet material is even, smooth;Clean the surface |
4 | The compressed air supply device (1) the rated pressure: 14 bar (2)Capacityt: 1 m3 |
Theory Cutting parameter
Power(W) | مواد | ضخامت (ملی میتر) | Cutting speed(m/min) | ګاز |
800 | دزنګ ضد اوسپنه | 1 | 8-9 | N2 |
2 | 5-6 | N2 | ||
3 | 1.8-2 | N2 | ||
4 | 1.2-1.3 | N2 | ||
800 | د کاربن فلز | 1 | 8-10 | O2 |
2 | 4-5 | O2 | ||
3 | 2.8-3 | O2 | ||
4 | 1.4-1.8 | O2 | ||
5 | 1.2-1.5 | O2 | ||
6 | 0.9-1.1 | O2 | ||
8 | 0.6-0.7 | O2 |
Power(W) | مواد | ضخامت (ملی میتر) | Cutting speed(m/min) | ګاز |
500 | دزنګ ضد اوسپنه | 1 | 6-8 | N2 |
2 | 2-2.2 | N2 | ||
3 | 0.6-0.8 | N2 | ||
500 | د کاربن فلز | 1 | 7-8 | O2 |
2 | 3.5-4 | O2 | ||
3 | 2.8-3.2 | O2 | ||
4 | 1.3-1.5 | O2 | ||
5 | 0.9-1.1 | O2 | ||
6 | 0.6-0.7 | O2 |